Korea Joil pulse solenoid valve JISI80 JIHI80 Diaphragm DN80
Advantages of 80A Diaphragm Valve
Rate of discharge(Highly efficient and large capacity 3"(80A) blow tube applied valve.
Header Type released: easy installation, easy maintenance and excellent performance.
With internal impulse type diaphragm set employment, impact reduction and durability enhancement at opening and closing.
Characteristics
1. Solenoid coil has one-touch terminal block with easy electrical wiring.
For outdoor use, use aluminum die-casting material body.
2. A timer controller for quick opening and closing of valve and a waterproofed, up to 180'C heat resistance coil are used.
3. Diaphragm is manufactured with special nylon and synthetic rubber, so it is excellent even in any temperature and environment.
4. Diaphragm of the valve, the crucial part has a revetment between shock absorbent plate and shield plate, so guarantee lower noise and long life by preventing clearance & buffer role.
Joil Diaphragm repair kits
| Joil Diaphragm repair kits |
| Type | Quantity | Suitable valve | Material |
| 1" | 1 | JICI25, JICR25, JISI25, JISR25 | Nitril or fluororubber |
| 1 1/2" | 1 | JICI40, JICR40, JISI40, JISR40 |
| 1 1/2" | 2 | JICI40, JICR40, JISI40, JISR40 |
| 2" | 2 | JISI50, JISR50 |
| 2 1/2" | 2 | JISI65, JISR65 |
| 3" | 2 | JISI80, JISR80, JIHI80, JIHR80 |
Drawing
Photos Show:
Quality Standards
The company for the products are brand new original products, no second-hand and refurbished products, or leave a compensable ten and return the full amount, but the buyer due to our purchase of model error is not responsible for returns, another of the company's sales of products enjoy one year from the date of shipment quality assurance, according to the original quality standards, during warranty with product problems, need confirmation testing by the manufacturer, the supplier to be solved, the demand side due to storage, use, poor maintenance caused by lower-quality product, and not raise objections.
Delivery
1. If the products we have in store, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNL will be normal ways. If you require use of a courier, we can do it.
Competitive Advantage
| Our product features | Our Services Guarantee: |
| 1) Competitive price | 1) Prompt respond (Reply with 24 hours) |
| 2) Good quality | 2) Free Samples (Customer pay for the delivery cost) |
| 3) Professional Packaging | 3) Registration support. |
| 4) Produce according to Customers’ instruction | 4) Photos/videos are available during production. |
| 5) None delay shipment | 5) Loading inspection, and send loading photos before shipment. |
After-sale Service
We can provide a series of after-sale service, such as product introduction, mounting, debugging, technical support and so on.
Warranty
All item Comes with Basic 3 Month Sellers Warranty, if item defective in 3 Month, We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Month, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.
The installment introduction:
1. First, Confirm the pulse valve in good condition and then installed
2. Pulse valve will be installed directly the outer wall of flange of gas manifold. The spray pipe across the gas manifold. According to the drawing and manual, the pulse valve matching appropriate spray pipe and installation. To avoid the valve install in the air manifold bottom. If the pulse valve matched trachea and connector, the connector will be used for sealing purpose only. It can not as structural support components. It can not rely on the straight connector fixed spray torch and package. The spray pipe and air manifold must be fixed independent.
3. To tighten the hard nut, the maximum torque of 20 N*m.Tighten the trachea, torsion of 20 N*m.
4. The connection control wire needs connect of every electric control valve seat. Pay attention to the line adown to prevent rain waterproof. Or through the joint and nylon pipe, it will connect the pulse valve and electromagnetic assembly boxes of nylon pipe connection.
5. To ensure that provide compressed air clean and dry. The air manifold system provides moderate pressure and check for leaks installation. ( it can brush on soap and water, check whether the interface is bubble). Pressure was carried out on the air bag inflated (pressure of the valve is around 0.03 ~ 0. 86 mpa), recommend for air pressure 0.8 mpa maximum
6. Testing the pulse valve blowing, listening all the pilot valve whether it is normal operation and whether the pulse blowing sound is clear.
Product Tags:
|
|
Korea Joil Pulse Solenoid Valve JISI80 JIHI80 Diaphragm Repair Kit DN80 Images
|
