MHC2-20D Aluminum Alloy SMC Air Gripper Cylinder Augular Type Double Acting
ø10 , ø16, ø20, ø25
●A large amount of gripping force is provided through the use of a double piston mechanism, while maintain- ing a compact design.
●Built-in variable throttle
●A solid state auto switch with an indicator light can be mounted.
| Specifications | |
| Fluid | Air |
| Operating pressure | Double acting | 0.1 to 0.6 Mpa |
| Single acting | 0.25 to 0.6 Mpa |
| Ambient and fluid temperature | -10℃ to 60℃ |
| Repeatability | ±0.01mm |
| Max.operating frequency | 180 c.p.m |
| Lubrication | Not required |
| Action | Double acting, Single acting |
| Auto switch (Option) | Solid state auto switch (3-wire,2-wire) |
| Model | | | | | |
| Action | Model | Bore size
(mm) | Gripping moment (N-m) | Opening/closing
angel
(Both sides) | Weight
(g) |
| Double acting | MHC2-10D | 10 | 0.10 | 30º to －10º | 39 |
| MHC2-16D | 16 | 0.39 | 91 |
| MHC2-20D | 20 | 0.70 | 180 |
| MHC2-25D | 25 | 1.36 | 311 |
| Single acting | MHC2-10S | 10 | 0.070 | 30º to －10º | 39 |
| MHC2-16S | 16 | 0.31 | 92 |
| MHC2-20S | 20 | 0.54 | 183 |
| MHC2-25S | 25 | 1.08 | 316 |
Guidelines for the selection of the gripper with respect to workpiece mass
1.Although conditions differ according to theworkpiece shape and the coefficient of frictionbetween the attachments and the workpiece,select a model that can provide a grippingforce of 10 to 20 times the workpiece mass, ormore.
2. If high acceleration, deceleration or impact forces are encountered during motion, afurther margin of safety should be considered.o
3.If there is an overhang, please consult with SMC.
Indication of effective gripping force
1.The effective gripping force shown in thegraphs below is expressed as F, which is thethrust of one finger, when both fingers andattachments are in full contact with theworkpiece as shown in the figure below.
A Caution
Use caution for the anti-corrosiveness of finger guide section.
Martensitic stainless steel is used for the finger. However, be aware that its anti-corrosion performance is inferior to austenitic stainlesssteel. ln particular, the finger might be rusted in an environment where water droplets are adhered to it due to dew condensation.
How to Mount the Attachment to the Finger
To mount the attachment to thefinger, make sure to use awrench to support the attachment so as not to applyundue strain on the finger.Refer to the tablebelow for the propertightening torque onthe bolt used forsecuring the attachment to thefinger.
After-sale Service
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some unexpected problems happen, we hope to solve the problems with buyer through friendly in the following ways:
1, If it is quality problem, buyer can submit argue within 15days after receiving the goods, buyer must provide photos or video and other evidence to seller for identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one year (not included those damages coursed by shipping or Man-made damaged ). A 15% restocking fee is assessed for any products returned in "used" condition. And then we will send a new product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD) has quality problems, we will resend a new product in buyer next order; if buyer don't plan to make a new order in the near term, buyer can pay the resend shipping cost and ask to resend a new product. If there is an issue with the products, please contact us– we will solve it as soon as we get your email.
Product Tags:
|
|
MHC2-20D Aluminum Alloy SMC Air Gripper Cylinder Augular Type Double Acting Images
|
