MXQ25-50 SMC Cylinder Air Slide Table Pneumatic Cylinder Standard type
Cylinder with built-in guide rail and table
Now with recirculating linear ball bearings for high rigidity and high precision
Air slide table for precise assembly applications
| Specifications |
| Bore size (mm) | 6 | 8 | 12 | 16 | 20 | 25 |
| Fluid used | Air |
| Action | Double acting |
| Operating pressure | 0.15 to 0.7MPa |
| Proof pressure | 1.05 MPa |
| Ambient and fluid temperature | –10 to 60°C |
| Operating speed range | 50 to 500mm/s (Adjuster option/Metal stopper: 50 to 200mm/s) |
| Lubrication | Not required |
| Cushion | Rubber bumper (Standard, Adjuster option/Rubber stopper) Shock absorber (Adjuster option/Shock absorber) None (Adjuster option/Metal stopper) |
| Auto switch | Reed switch (2 wire, 3 wire) Solid state switch (2 wire, 3 wire) 2 colour indication solid state switch (2 wire, 3 wire) |
| Tolerance of stroke length | +1mm 0 |
| Standard Stroke | Standard stroke (mm) |
| Model | |
| MXQ 6 | 10, 20, 30, 40, 50, |
| MXQ 8 | 10, 20, 30, 40, 50, 75, |
| MXQ 12 | 10, 20, 30, 40, 50, 75, 100, |
| MXQ 16 | 10, 20, 30, 40, 50, 75, 100, 125 |
| MXQ 20 | 10, 20, 30, 40, 50, 75, 100, 125, 150 |
| MXQ 25 | 10, 20, 30, 40, 50, 75, 100, 125, 150 |
Selection
Caution
1.Do not apply a load beyond the range of the operation limits. Select the model by using the maximum allowable load and allowable moment. Refer to pages p.2-190 for details. When an actuator is used beyond its operating limits, eccentric loads on the guide section will be in excess which results in shorter life span due to play or inaccuracy of guide section.
2. If a table is stopped at an intermediate position by an external stopper, avoid ejection. If ejection occurs, it causes damage. If a slide table is stopped at an intermediate position by an external stopper and then forwarded to the front, draw back the intermediate stopper after supplying pressure to allow the slide table to return to the back for an instant, then supply pressure to the opposite port to operate the slide table.
3.Do not use in circumstances that excessive, external forces or impacts would be applied. These conditions could lead to malfunctions
Environment
Caution
1.Do not use in an environment exposed directly to liquids such as cutting oil.
If used in an environment exposed to cutting oil, coolant or oil mist, it generates play, increased sliding resistance of air leakage.
2.Do not use in an environment exposed directly to powder, dust or spatter etc.
It generates play, increases sliding resistance or air leakage. Consult SMC for use in such an environment.
3.Install a shade screen if exposed to the direct sun light.
4.Install a blocking cover if a heat source is in the area.
The product temperature may rise above the range of usage limit by radiant heat if a heat source is in the area. Install a cover to block from heat source.
5.Do not use in the area where there are vibrations or impacts.
It results in damage or malfunction. Consult SMC for usage under these environment.
Warranty
All item Comes with Basic 3 Months Sellers Warranty, if item defective in 3 Months, We will offer replacement without extra Charger(including shipping fee)After we Receive the Defective item.
If item Defective after 3 Months, Buyers can still send it back, We will contact suppliers or Manufactory for Warranty. Buyers Might Need to pay the Shipping fee For resend the replaced item.
Delivery
1. If the products we have in stock, we will send it out ASAP after payment.
2. If the products which were customized, we will complete the production within a specified period of time, and send it out the first time, we can promise it.
3. Also we can send by your delivery acount if you want.
4. We have a variety of ways to send goods, usually DHL, Fedex, TNT will be normal ways. If you require use of a courier, we can do it.
Serves time
0:00 - 23:59
From Monday to Sunday
After-sale Service
One year quality guarantee Policy
We will check the goods quality before shipment. If there are some unexpected problems happen, we hope to solve the problems with buyer through friendly in the following ways:
1, If it is quality problem, buyer can submit argue within 15days after receiving the goods, buyer must provide photos or video and other evidence to seller for identify.
2, Man-made damaged, buyers take full responsibility.
3, Product quality processing program:
1) The buyer return the products for bad quality reasons for one year (not included those damages coursed by shipping or Man-made damaged ). A 15% restocking fee is assessed for any products returned in "used" condition. And then we will send a new product to buyer and pay for the resend shipping cost.
2) If the goods (total price including shipping is less than 10USD) has quality problems, we will resend a new product in buyer next order; if buyer don't plan to make a new order in the near term, buyer can pay the resend shipping cost and ask to resend a new product. If there is an issue with the products, please contact us– we will solve it as soon as we get your email.
Product Tags:
|
|
Double MXQ25-50 Pneumatic Air Cylinders SMC Standard Type Images
|
